For use on injection plastic kits a primer is necessary. ‘Regular A-Stand paint’ is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which A-stand paint can craze. High-Shine A-Stand paint finishes require a glossy black base coat.
Candy Enamels:
Candy paints require candy base primer (Bright Silver Candy Base).
Bright Silver Candy Base:
Shake thoroughly before use. Do not thin. Surfaces must be completely clean. Apply 1 medium coat at 20-30PSI to clean bare plastic. Dry time 15-30 minutes. As the carrier evaporates the shine will develop. Allow to cure for 1 hour before coating with Alclad Candy Enamels. Avoid using in excessively damp or humid conditions. Finger marks on the bare plastic will appear in the final finish.
/7676426a61bef614.jpg)
/130792642d2b9be2ae5.jpg)
/8436a00a7d529453.png)
/1307946426ba207b5a2.jpg)
/130801642d27e2e39be.jpg)
/130805642d289dbf2a9.jpg)
/130806642d24f35abf8.jpg)
/130809642d25fde208f.jpg)
/130811642d2531d88e6.jpg)
/130813642d26204003c.jpg)
/130816642d25e0e11a7.jpg)
/130818642d29fd510af.jpg)
/130819642d221a51d75.jpg)
/130822642d29d76dd25.jpg)
/130824642d2931bf5d9.jpg)
/130825642d2954b7ec5.jpg)
/130826642d2996b9479.jpg)
/130827642d28f9a15a8.jpg)
/130828642d2914e4b32.jpg)
/130829642d297145267.jpg)
/130830642d208989bd4.jpg)
/130831642d26fa5c048.jpg)