For use on injection plastic kits a primer is necessary. ‘Regular A-Stand paint’ is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which A-stand paint can craze. High-Shine A-Stand paint finishes require a glossy black base coat.
Candy Enamels:
Candy paints require candy base primer (Bright Silver Candy Base).
Bright Silver Candy Base:
Shake thoroughly before use. Do not thin. Surfaces must be completely clean. Apply 1 medium coat at 20-30PSI to clean bare plastic. Dry time 15-30 minutes. As the carrier evaporates the shine will develop. Allow to cure for 1 hour before coating with Alclad Candy Enamels. Avoid using in excessively damp or humid conditions. Finger marks on the bare plastic will appear in the final finish.
/7676426a61bef614.jpg)
/130831642d26fa5c048.jpg)
/8436a00a7d529453.png)
/130832642d267c2d024.jpg)
/130833642d271e29bf5.jpg)
/130834642d2740968f2.jpg)
/130835642d26d3b82a5.jpg)
/130836642d26aceb42d.jpg)
/130837642d21f636cad.jpg)
/130841642d2379d4dec.jpg)
/130842642d232833aae.jpg)
/130846642d22a2ae02c.jpg)
/130848642d2410b4694.jpg)
/130849642d27a5cb692.jpg)
/130851642d278507f8b.jpg)