Frontpage / Quadpack 25 - Multirotor 4-Pack 25A ESCs

Quadpack 25 - Multirotor 4-Pack 25A ESCs

Manufactor: Castle Creations

193,89 €

Temporarily out of stock

The product is temporarily out of stock . We do not have any information on availability.

You can leave your email here and we'll notify you when the product is available.

Send

Add to wish list

Product code:	CC010-0132-00
Number:	CC010-0132-00
Brand:	Castle Creations

Technical information Reviews

Technical information ∨

It wasn’t until recently that Castle decided to spin into the Multi-Rotor market, and provide R/C enthusiasts with some of the most versatile and inventive systems ever devised. Enter the next master of the Multi-Rotor, the QuadPack 25.This pack of four (4) 25 amp ESCs have already been optimized for use in your Quadcopter or Multi-Rotor by utilizing three (3) ESCs without a BEC and one (1) with a BEC. No more hassling with disabling the BEC on three of the ESC, this package is made specifically to save you the headache. The small footprint and lightweight design makes it the perfect choice for smaller Quads and Multi-Rotors.A 490 Hz refresh rate makes the QuadPack 25 the epitome of stability during all aspects of flight from a simple hover to the most extreme maneuvers. Recommended for platforms pulling up to 25 amps** and running up to 6S LiPo, your Quadcopter or Multi-Rotor platform will perform as never before. While pre-programmed for your Multi-Rotor, the QuadPack 25 offers industry-leading software functions and USB programming capability via Castle Link USB adapter should you require them (Castle Link sold separately).Instructions - Click HERE.Specs:Input voltage: MIN: 2S LiPo - MAX: 6S LiPoMax continuous amperage at full throttle: 25 amps**BEC voltage (voltage regulator for powering radio and servos): 5.5 volts*BEC output: 8 amp peak*** - 3 amp continuous (always check servo draw prior to first flight)Dimensions & Weight:Width: 18.2 mmLength: 43.7 mmDepth: 8.1 mmWeight with wires (each): 17.8 gWeight without wires (each): 9 gItems needed for operation or installation:Battery connector and motor connectors sold separatelyProgrammability:Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.*This package contains one Multi-Rotor 25 with a BEC and three with no BEC. The single BEC supplies power for all 4 controllers.**RC HOBBY APPLICATION RATING: 25 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.***Peak indicates amperage sustainable for 0.5 seconds - long enough for most servos' current draw transients. Always confirm servo current draw before the first flight of the model.

Reviews >